pub struct LvtEntry(/* private fields */);

Implementations§

source§

impl LvtEntry

source

pub const VECTOR: Pack32<u8, LvtEntry> = _

source

pub const NMI: Pack32<bool, LvtEntry> = _

source

pub const SEND_PENDING: Pack32<bool, LvtEntry> = _

source

pub const POLARITY: Pack32<PinPolarity, LvtEntry> = _

source

pub const REMOTE_IRR: Pack32<bool, LvtEntry> = _

source

pub const TRIGGER: Pack32<TriggerMode, LvtEntry> = _

source

pub const MASKED: Pack32<bool, LvtEntry> = _

source

pub const fn from_bits(bits: u32) -> LvtEntry

Constructs a new instance of Self from the provided raw bits.

source

pub const fn new() -> LvtEntry

Constructs a new instance of Self with all bits set to 0.

source

pub const fn bits(self) -> u32

Returns the raw bit representatiion of self as an integer.

source

pub fn with<T>(self, field: Pack32<T, LvtEntry>, value: T) -> LvtEntry
where T: FromBits<u32>,

Packs the bit representation of value into self at the bit range designated by field, returning a new bitfield.

source

pub fn set<T>(&mut self, field: Pack32<T, LvtEntry>, value: T) -> &mut LvtEntry
where T: FromBits<u32>,

Packs the bit representation of value into self at the range designated by field, mutating self in place.

source

pub fn get<T>(self, field: Pack32<T, LvtEntry>) -> T
where T: FromBits<u32>,

Unpacks the bit range represented by field from self, and converts it into a T-typed value.

Panics

This method panics if self does not contain a valid bit pattern for a T-typed value, as determined by T’s FromBits::try_from_bits implementation.

source

pub fn try_get<T>( self, field: Pack32<T, LvtEntry> ) -> Result<T, <T as FromBits<u32>>::Error>
where T: FromBits<u32>,

Unpacks the bit range represented by field from self and attempts to convert it into a T-typed value.

Returns
  • Ok(T) if a T-typed value could be constructed from the bits in src
  • Err(T::Error) if src does not contain a valid bit pattern for a T-typed value, as determined by T’s [FromBits::try_from_bits implementation.
source

pub fn assert_valid()

Asserts that all the packing specs for this type are valid.

This is intended to be used in unit tests.

source

pub fn display_ascii(&self) -> impl Display

Returns a value that formats this bitfield in a multi-line format, using only ASCII characters.

This is equivalent to formatting this bitfield using a {} display specifier, but will never use Unicode box-drawing characters, even when an upstream formatter uses the {:#} fmt::Display specifier. This is intended for use on platforms where Unicode box drawing characters are never available.

source

pub fn display_unicode(&self) -> impl Display

Returns a value that formats this bitfield in a multi-line format, always using Unicode box-drawing characters.

This is equivalent to formatting this bitfield using a {:#} format specifier, but will always use Unicode box-drawing characters, even when an upstream formatter uses the {} fmt::Display specifier.

Trait Implementations§

source§

impl Binary for LvtEntry

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.
source§

impl Clone for LvtEntry

source§

fn clone(&self) -> LvtEntry

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for LvtEntry

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl Display for LvtEntry

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl From<u32> for LvtEntry

source§

fn from(val: u32) -> LvtEntry

Converts to this type from the input type.
source§

impl LowerHex for LvtEntry

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.
source§

impl UpperHex for LvtEntry

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.
source§

impl Copy for LvtEntry

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Az for T

source§

fn az<Dst>(self) -> Dst
where T: Cast<Dst>,

Casts the value.
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<Src, Dst> CastFrom<Src> for Dst
where Src: Cast<Dst>,

source§

fn cast_from(src: Src) -> Dst

Casts the value.
source§

impl<T> CheckedAs for T

source§

fn checked_as<Dst>(self) -> Option<Dst>
where T: CheckedCast<Dst>,

Casts the value.
source§

impl<Src, Dst> CheckedCastFrom<Src> for Dst
where Src: CheckedCast<Dst>,

source§

fn checked_cast_from(src: Src) -> Option<Dst>

Casts the value.
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> OverflowingAs for T

source§

fn overflowing_as<Dst>(self) -> (Dst, bool)
where T: OverflowingCast<Dst>,

Casts the value.
source§

impl<Src, Dst> OverflowingCastFrom<Src> for Dst
where Src: OverflowingCast<Dst>,

source§

fn overflowing_cast_from(src: Src) -> (Dst, bool)

Casts the value.
source§

impl<T> SaturatingAs for T

source§

fn saturating_as<Dst>(self) -> Dst
where T: SaturatingCast<Dst>,

Casts the value.
source§

impl<Src, Dst> SaturatingCastFrom<Src> for Dst
where Src: SaturatingCast<Dst>,

source§

fn saturating_cast_from(src: Src) -> Dst

Casts the value.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> UnwrappedAs for T

source§

fn unwrapped_as<Dst>(self) -> Dst
where T: UnwrappedCast<Dst>,

Casts the value.
source§

impl<Src, Dst> UnwrappedCastFrom<Src> for Dst
where Src: UnwrappedCast<Dst>,

source§

fn unwrapped_cast_from(src: Src) -> Dst

Casts the value.
§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
source§

impl<T> WrappingAs for T

source§

fn wrapping_as<Dst>(self) -> Dst
where T: WrappingCast<Dst>,

Casts the value.
source§

impl<Src, Dst> WrappingCastFrom<Src> for Dst
where Src: WrappingCast<Dst>,

source§

fn wrapping_cast_from(src: Src) -> Dst

Casts the value.